KLEENAIR AIR PRECLEANERS
With a simple 'push-fit' install to the air intake pipe KLEENAIR air precleaners will remove up to 97% of air borne debris from the incoming air before it enters the air induction system of the engine, particularly for severe environments such as mining, construction, and forestry.
The combination of Kleenair, Kleenoil and Kleenfuel can ensure the highest engine hygiene.
Improved fuel economy: as filters get dirty and restriction increases, combustion efficiency is reduced.
Extended oil filter life: reduces the amount of contaminant the oil has to trap.
Reduced emissions: combustion efficiency decreases as air is restricted from passing through the filter. The longer the filter stays “clean”
Reduce Operating Costs
Increase Filter Life
Improve Fuel Efficiency
Increase Engine Life
Airflow range 3 to 2000 CFM (can be manifolded for greater CFM requirements)
Self cleaning ejector system eliminates up to 97% of dirt from the air stream extending element life up to 10 times — or more !
Can be mounted in any position vertical, horizontal, even upside down !
Kleenair air precleaners are designed to remove most of the contaminant’s from the air that feeds the engine. Not only do they extend filter life, but turbochargers, blowers, cylinder liners, piston rings, and lubricating oil are protected from extreme wear caused by contaminants reaching the engine.
KLEENAIR are sized to the appropriate CFM of your engine -
if you have difficulty calculating the correct unit to purchase - contact us direct for advise.