KLEENOIL have partnered with FA-ST to offer On-Site Analysis Services particular of interest in areas using Hydraulic Oils.   FA-ST is a Midlands based company offering oil filtration solutions, installations of oil by-pass filter units, filter carts, particle counting, oil sampling and analysis, contamination control and hydraulic system pressure testing to all industries throughout the UK. All services are available on site. Using up to date technology FA-ST can identify and remove water and particle contamination levels in all types of mineral, synthetic, biodegradable oils, cutting fluids etc. and diesel fuel and offer a variety of solutions.    Identifying levels of contamination above the recommended ISO specifications can pinpoint potential problems and give an early indication of wear in oil washed compartments. Oil, filters and machine components are expensive but by installing a by-pass filtration unit, or filtering the oil in the system using a filter cart FA-ST can dramatically cut down on these costs.   All on site diagnostic equipment is fully calibrated and uses the latest technology with the back up service of an established Oil Laboratory. Regular oil sampling keeps minor repairs from becoming major failures. When contemplating buying used equipment, an oil sample or particle count can be used to evaluate the condition of the machine. FA-ST use a network of Hydraulic engineers for the installation of filtration units and work can be carried out in most areas of the UK. FA-ST only installs quality products that have been tried and tested over many years and can give a full technical and installation backup support to all customers. FA-ST are an appointed distributor for the KLEENOIL product range of by pass filtration units for hydraulic and engine applications.