“Simply the finest oil filter “                                    

KLEENOIL FILTRATION LTD

Home

 Contaminated oil is the main cause of all machine faults and downtime.

 THE SOLUTION TO DIRTY OILS …..

KLEENOIL BY PASS FILTRATION SYSTEMS

REMOVE CONTAMINATES DOWN TO 1 MICRON (relative) AND ALL WATER.

( NAS  1638 CLASS 6 )

 

 

 

 

Hydraulic fluids are in every type of manufacturing equipment and the standard of cleanliness is important in their maintenance. Good maintenance requires that the oil must be filtered, analysed and replaced. And despite all this, companies still suffer downtime during which pumps, valves, cylinders and seals need to be replaced.

Sources of contamination ...Even new hydraulic fluid is dirty, Pumps, valves, pipes, hoses, heat exchangers and oil tanks all bring dirt from the manufacturer. Abrasive wear and erosion cause additional contamination whenever dirt particles circulate through the system at high speed and at high pressure. Dirt particles from the surrounding air, entering through breathers and cylinders rod seals, add to the system's contamination load. Condensation caused by changes in temperature and leaking oil cooling systems contaminate the oil with water. A combination of metal particles (which act as catalysts), water and oxygen at relatively high temperatures will result in increased and accelerated oxidation of the oil. During this complex process of oxidation, polymerisation cause sludging. 

Due to their microscopic size, they are not removed by traditional filter systems, and because of their sticky structure and corrosive effect, they directly affect the efficiency and the reliability of the hydraulic system.

FOR TECHNICAL DATA ON ALL ASPECTS OF OIL CONTAMINATION CLICK HERE 

Engine oils….The cleanliness of your engine fluid is crucial to the trouble-free and cost-effective operation of your engine system.  Engine components are costly and need special consideration when this fluid is selected and subsequently filtered.  The ISO 4406 Code is a recognized standard in the industry. Certain recommended cleanliness quantities are necessary to realize the most efficient performance of your system.  

 As soon as you start your engine, you begin the deterioration process of your oil. As the engine runs, dirt, wear metal particles, fuel, soot, and water start to weaken your oil's lubrication and protection properties. These harmful elements can be eliminated by an oil change, but once the oil is replaced, the deterioration process just starts over again. 

We have been taught that regular oil and filter changes are required to protect our engines and hydraulic systems. The Kleenoil Filtration System, however, allows us to extend the time between oil drains as well as reducing the adverse effects of harmful particles in the engine.

Normal full-flow filters have approximately 90 to 130 litres of oil passing through the filter media each minute. As a result, the fluid passes through so quickly that it cannot be finely filtered, nor can water be removed. While the film of oil between moving parts in an engine is generally about 3 microns, regular oil filters only filter down to between 15 and 40 microns.

The Kleenoil filter, however, is a by-pass filter that passes only a small portion of the total oil flow through a very dense filtering media at about 2.5 litres per minute. At this speed, it is possible to remove particles down to 1 micron and totally remove water, greatly decreasing engine wear and prolonging oil life.

 

THE KLEENOIL SYSTEM STARTS AS LOW AS £130 INSTALLED, AND CAN BE USED IN A HUGE VARIETY OF APPLICATIONS FROM FACTORY MACHINES, HYDRAULICS, PLANT, COMMERCIAL VEHICLES …..

 WHERE EVER OIL PROBLEMS COST DOWNTIME AND PARTS REPLACEMENTS. 

KLEENOIL BY PASS FILTRATION contributes to proactive maintenance programs by:

· Reducing vehicle / machine operational costs

· Extending depreciating costs

· Maximizing the life of oils

· Extending the useful life major components and machines

· Improving daily machine availability through scheduled maintenance

· Reducing unscheduled service breakdowns and costly repairs

· Freeing up technicians to perform other important service tasks

· Reducing oil disposal fees

· Reducing dependency on foreign oil

·  

Enhancing our environmental commitment and awareness

TEL : 01977 682810

FAX : 01977 685457

KLEENOIL FILTRATION LTD

FENTON LANE

SHERBURN IN ELMET

LEEDS LS25 6EZ

To contact us: